FARO FocusS 350 Plus Laser Scanner

The FARO Focus S 350 Plus unit is specifically designed for outdoor applications due to its small size, extra light weight, and extended scanning range. Even in challenging environments, narrow job sites, dusty or humid areas, rain or direct sun



Demo used FARO Focus S350 Plus Laser Scanner, almost new, still under warranty. Manufactured 2020 accompanied by its calibration certificated 24/12/2021. This FARO FocusS 350 Plus with Extra Speed, reduced noise, and status indicate also the advantages of FocusS 350 Plus are to increase the maximum scanning speed to 2 million points per second, reduction of the distant noise of the point cloud, FARO scan status indicator already included on this bundled SET.  FARO has remedied this with the new scan status indicator. The attachment is plugged into the red connection socket on the top of the scanner. The scan status indicator generates blue and red light patterns, which you can use to see the progress of the scan.

This scanner was developed especially for outdoor applications; it has a range of 350 meters. The FocusS 350 Plus provides scan results even in challenging environments, such as tight locations, dusty and humid terrain, rain and direct sunlight. The integrated GPS and GLONASS receivers allow easy positioning. Thanks to the large touch screen, operation is very intuitive. The integrated 8 MP HDR camera provides high-contrast images in natural colors for the scan data. Thus, light conditions with extreme differences in brightness are no problem. Due to its low weight and compact dimensions as well as a battery life of 4.5 hours, the FocusS 350 Plus is your ideal companion.


  • (1X) Focus S350 Plus Scanner
  • (1X) FARO Scan Status Indicator 
  • (1X) SD Card 32 GB
  • (1X) SD Card Reader and Cover Case
  • (1X) Additional Micro SD Card Slot 
  • (2X) Batteries
  • (1X) Charger 
  • (1X) Quick Charger Base
  • (1X) Top of tripod month for bottom scanner
  • (1X) Calibration Certificate and Quick Start Guide
  • (1X) Optic Cleaning Fluid and Tissues (Lenses cleaning)
  • (1X) Original Pelican Hardcover cases for LiDAR and Starter Kit 
  • (1X) GITZO Tripod (mouth Extension, quick attach the piece, gearing set new)
  • (1X) Reference Sphere KIT (5 Spheres)
  • (check board, laser mouth, small magnet Standard, tripod feed for the base sphere)


  • Range: From 0.6 m to 350 m
  • Distance: Accuracy of +/- 1 mm
  • Measuring: Speed up to 2,000,000 points/sec
  • HDR photos: up to 165 megapixels
  • Laser class: 1
  • Dimensions: 230 x 183 x 103 mm
  • Weight: 4.2 kg
  • Extended operating: Temperature range from -10 °C to + 55 °C
  • Storage: On standard SD cards
  • Integrated sensors: GPS / Glonass, leveling, height sensor, compass
  • Scanner control: Via touch screen or mobile device (WLAN)
  • On-site compensation: Automatically improve the compensation
  • On-site registration: Automatic transfer processing on a laptop/tablet accessory interface

The Scan Status Indicator: 

  • Dimensions: 10 cm x 3.5 cm x 2 cm
  • Weight: 26 g
  • Connection: Red connection socket (battery side) on the top of the scanner

Differences compared to the FARO FocusS 350:


Picked For You

Artec Ray 3D Scanners


Faro Focus S 350 Scanner


Leica RTC360 Laser Scanner